Rent
Buy

RODE VideoMic Pro Plus On-Camera Shotgun Microphone

Resources

  • Manual
  • RODE VideoMic Pro Plus On-Camera Shotgun Microphone


    The RODE VideoMic Pro Plus On-Camera Shotgun Microphone is an excellent mono supercardioid condenser shotgun mic designed for on-camera video capture. Key features include:

    • On-camera primary and reference audio capture

    • 20 Hz to 20 kHz frequency response

    • Three-way level control: -10 dB, 0 dB, and +20 dB

    • Three-step high-pass filter: 0 Hz, 75 Hz, and 150 Hz

    Read More

    USB charger & 1/8" cable are not included.

    These accessories are also available separately:

    Specifications

    Audio Type

    Shotgun Mic

    Brand

    Rode

    Connectivity

    Output Connectors (Analog)

    • 1x 1/8" / 3.5mm TRS
    Headphone Connector
    • None
    Number of Conductors
    • 2

    Item Type

    Audio

    Mfr. Model Number

    VMP+

    Microphone

    Form Factor

    • Stand/Boom Mount
    Sound Field
    • Mono
    Operating Principle
    • Line Gradient
    Capsule
    • Electret Condenser
    Diaphragm
    • 0.55" / 13.97mm
    Polar Pattern
    • Supercardioid
    Orientation
    • End Address
    Circuitry
    • Solid-State (JFET)
    Pad
    • None
    High-Pass Filter
    • 75 Hz
    • 150 Hz
    Tone Adjustment
    • High Boost: +5 dB at 7 kHz
    Gain Adjustment
    • -10 dB to +20 dB
    Indicators
    • 1x Single LED (Power, Status)
    • 6x Single LED (Status)
    On-Board Controls
    • Gain/Sensitivity, High-Pass Filter, HF, On/Off
    Windscreen
    • Foam (Included)

    Performance

    Frequency Range

    • 20 Hz to 20 kHz
    Maximum SPL
    • 133 dB SPL
    Off-Axis Rejection
    • 5 dB at 60°
    • 23 dB at 120°
    • >10 dB at 180°
    Impedance
    • 200 Ohms
    Sensitivity
    • -33.6 dBV/Pa at 1 kHz
    Output Level
    • 7.6 dBu (Max)
    Dynamic Range
    • 118.8 dB
    Signal-to-Noise Ratio
    • 79.8 dB
    Equivalent Noise Level
    • 14 dB A-Weighted

    Physical

    Color

    • Black
    Mounting
    • Camera/Shoe-Mount, Shockmount (via Integrated Hardware)
    Mounting Thread Size
    • 3/8"-16 Female
    Included Case
    • None
    Dimensions (ø x L)
    • 4.4 × 6.7″
    Weight
    • 0.3 lb.

    See All