Rent
Buy

Shure P10T Dual-Channel Wireless Transmitter (G10)

Product images are stock photography and do not represent the contents of a purchase.

Resources

  • PSM1000 Guide
  • Shure P10T Dual-Channel Wireless Transmitter (G10)


    The Shure P10T Dual-Channel Wireless Transmitter (G10) is a wireless transmitter designed to deliver impeccable RF signal and audio quality when paired with the P10R+ Receiver. Key features include:

    • Networkable via Ethernet

    • Switchable RF output power

    • Transmitter only

    • 72 MHz tuning bandwidth

    Read More

    Specifications

    Audio Outputs

    Connector Type

    • 1/4" TRS
    Configuration
    • Electronically Balanced
    Impedance
    • Connected Directly to Inputs

    Audio Type

    Transmitter

    Brand

    Shure

    General

    RF Carrier Frequency Range

    • G10: 470 to 542 MHz
    Compatible Frequencies
    • Per Band: 39
    Tuning Bandwidth
    • 72 MHz
    Operating Range
    • 300’ (Environment Dependent)
    Frequency Response
    • 35 Hz to 15 kHz (±1 dB)
    Signal to Noise Ratio
    • 90 dB (Typical) A-Weighted
    Total Harmonic Distortion (THD)
    • Ref. ±34 kHz Deviation at 1 kHz <0.5% (Typical)
    Companding
    • Patented Shure Audio Reference Companding
    Spurious Rejection
    • Ref. 12 dB SINAD: >80 dB (Typical)
    Frequency Stability
    • ±2.5 ppm
    MPX Pilot Tone
    • 19 kHz (±0.3 kHz)
    Modulation
    • FM (±34 kHz Deviation at 1 kHz)
    • MPX Stereo Ref.
    Operating Temperature
    • 0 to 135°F

    Item Type

    Audio

    Physical

    Dimensions

    • 1.7 × 19.0 × 13.5″
    Weight
    • 10.4 lb

    Transmitter

    RF Output Power

    • Selectable: 10, 50, 100 mW (20 dBm)
    RF Output Impedance
    • 50 Ohms (typical)
    Power Requirement
    • Input: 100 to 240 VAC, 50/60 Hz, 0.5 A Max (5.5, with Outlet Loaded)
    • Output: 100 to 240 VAC, 50/60 Hz, 5 A Max, Unswitched
    Audio Input
    • Combination XLR-1/4" /6.3 mm TRS
    Polarity
    • XLR: Non-Inverting (Pin 2 Positive with Respect to Pin 3)
    • 1/4": Tip Positive with Respect to Ring
    Configuration
    • Electronically Balanced
    Impedance
    • 70.2 Kilohms (Actual)
    Nominal Input Level
    • Switchable: +4 dBu, -10 dBV
    Maximum Input Level
    • 4 dBu: +29.2 dBu
    • -10 dBV: +12.2 dBu
    Pin Assignments
    • XLR: 1=Ground, 2=Hot, 3=Cold
    • 1/4" TRS: Tip=Hot, Ring=Cold, Sleeve=Ground
    Phantom Power Protection
    • Up to 60 VDC