For EXTERNA 55. Whether you’re rocking the PL or Fuji G ETERNA 55, this Bright Tangerine Create VCT and Basic Cage Kit will get your accessory mounting just right. Overall, this comprehensive cage not only offers slight protection against accidents, but a massive amount of accessory opportunities. Read further for an in-depth look at each individual component!

NATO Top Plate. The Bright Tangerine NATO Top Plate for FUJIFILM GFX ETERNA mounts directly to the top of the camera through two included 3/8"-16 hex screws. It provides you with a NATO rail with safety stops, two QD sockets with anti-twist 1/4"-20 and 3/8"-16 threads, and two focal plane marks for focus pulling on either side of the camera.

VCT-14 Create Shoulder Rig. The Bright Tangerine VCT-14 Create Shoulder Rig adds a layer of comfort to this cage setup. Featuring an adjustable foam shoulder pad, this rig uses built-in magnets on the top of the pad and on the base to offer 4 positions and maintain a balanced experience. This is a relatively universal and customizable rig, offering a VCT-14 base for tripod mounting, a Manfrotto, DJI, and Arca-compatible top plate with safety stops, and dual ARRI rosettes on either side to add handgrips.

Rear Side Plate. The Bright Tangerine Rear Side Plate provides general protection, and is equipped with a NATO rail, three anti-twist 1/4"-20 threads, and four anti-twist 3/8"-16 threads for accessory mounting.

Side Ribs. The Bright Tangerine Side Rib and Side Rib Brace work together to offer even more mounting points. You’ll receive two Side RIbs alongside the connection Side Rib Brace to add access to another NATO rail, four anti-twist 3/8"-16 threads, and four anti-twist 1/4"-20 threads. The ribs attach to the cage using the top plate!

15mm LWS Lens Support. Rounding this kit off is the Bright Tangerine 15mm LWS Lens Support. This small but mighty accessory supports your 39mm to 153mm diameter lens using 1/4"-20 or 3/8"-16 screws, and offers 15mm LWS rod holders for the included 15mm Drumstix pair.