Rental
Available Thursday
The Panasonic AW-UE80KPJ 4K Pro PTZ Camera is a compact, professional-grade, remotely controlled camera that’s equally great for a range of applications. Key features include:
1/2.5-inch 4K CMOS sensor
HDMI, SDI, and IP video output
Up to UHD 4K60/1080p60 video capture
Built-in NDI | HX support, 24x zoom, PoE+
Upon initial startup, you must follow these steps:
1. Access the camera via the webUI. The IP address is 192.168.0.10 and the Subnet is 255.255.255.0
2. Assign an account name and password.
3. Reboot the camera to log back in. You’ll be prompted to enter the initial network settings.
Access the webUI and go to setup at the top
Enter username and password if prompted
Select the Video over IP tab
Select Streaming Mode
Select High Bandwidth NDI or NDI|HX2 under the drop-down menu and set.
Turn off the camera and flip up the first IR switch and first Settings switch on the back of the camera and power cycle. Once power cycled, unplug the camera and flip the switches back off. Once camera is powered back on it will be at its original factory settings.
NDI is a high quality/high bandwidth streaming output while NDI|HX is high efficiency/low bandwidth streaming output. Use depends on your network setup.
You can monitor camera view via webUI, SDI / HDMI, and compatible third-party software.
This camera uses NDI HX2 or High Bandwidth NDI protocols, so we recommend making sure all third-party software is up to date.
No, this camera doesn’t support microSD recording.
Brand | Panasonic |
Camcorder Type | PTZ |
Camera | Shutter Speed
|
Camera Type | Camcorder |
Control | Move Speed
|
Environmental | Operating Temperature
|
Image Sensor | Image Sensor
|
Interfaces | Video Output Connectors
|
Brand | Panasonic |
Camcorder Type | PTZ |
Camera | Shutter Speed
|
Camera Type | Camcorder |
Control | Move Speed
|
Environmental | Operating Temperature
|
Image Sensor | Image Sensor
|
Interfaces | Video Output Connectors
|