Teradek Bolt Pro 300 HD-SDI/HDMI Wireless Receiver

342112775590

Recommended:

$131.00
/
7 Day

Rental

Interested in purchasing?

Learn More

Includes

  • Bolt Pro 300 receiver with Sony L Series Battery Plate
  • (1) Sony NP-F970 Battery
  • Hardware Kit: (2) 1/4"-20 × 1.5″ screws & 3/16" allen key
  • Hot Shoe Mount
  • Redrock microMount

AC adapters available upon request.
HDMI/SDI cables are not included

Resources

  • Manual
  • Teradek Bolt Pro 300 HD-SDI/HDMI Wireless Receiver

    The Teradek Bolt Pro 300 HD-SDI/HDMI Wireless Receiver is offered as an add-on accessory for our Teradek Bolt Pro 300 Wireless HD-SDI/HDMI Kit. Key features include:

    • Multiple Receiver Streaming. The Bolt Pro 300 is capable of sending video to 4 receivers simultaneously. Our Teradek Bolt Pro 300 Wireless HD-SDI/HDMI Kit comes with one receiver. If you need more, you’ve come to the right place.
    • Sony L-Series Powered. We opted to add Sony L-Series battery brackets to both the transmitter (not included) and receiver. The included Sony NP-F970 battery provides about 5 hours of use. If you’re already using an Anton Bauer or V-mount setup, we also rent the Teradek 2-Pin LEMO to D-Tap Cable.

    HDMI / SDI cables not included!

    A Sony battery charger is not included, but a dual charger comes with the Teradek Bolt Pro 300 Wireless HD-SDI/HDMI Kit.

    Specifications

    Audio

    48kHz 24-bit PCM

    Brand

    Teradek

    Color sampling

    Y:Cb:Cr 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later) and RGB 4:4:4 (HDMI out, 8-bit color)

    Consumption(1080p60)

    8.2Watts

    Delay(TX to RX)

    <0.001sec (when no video format conversion is enabled)

    Inputs

    1 × 75 Ohm BNC and 1 x Type A receptacle HDMI

    Item Type

    Monitoring and Recorder

    Monitoring Type

    Wireless

    See All

    Includes

    • Bolt Pro 300 receiver with Sony L Series Battery Plate
    • (1) Sony NP-F970 Battery
    • Hardware Kit: (2) 1/4"-20 × 1.5″ screws & 3/16" allen key
    • Hot Shoe Mount
    • Redrock microMount

    AC adapters available upon request.
    HDMI/SDI cables are not included

    Specifications

    Audio

    48kHz 24-bit PCM

    Brand

    Teradek

    Color sampling

    Y:Cb:Cr 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later) and RGB 4:4:4 (HDMI out, 8-bit color)

    Consumption(1080p60)

    8.2Watts

    Delay(TX to RX)

    <0.001sec (when no video format conversion is enabled)

    Inputs

    1 × 75 Ohm BNC and 1 x Type A receptacle HDMI

    Item Type

    Monitoring and Recorder

    Monitoring Type

    Wireless

    See All

    Resources

  • Manual
  • Teradek Bolt Pro 300 HD-SDI/HDMI Wireless Receiver

    $131.00
    /
    7 Day

    Rental