The DJI Inspire 2 with X7 camera is a compact and powerful quadrotor drone that can record 6K RAW or 5.2K ProRes and 4K h.265 or h.264 video through its gimbal-stabilized, super 35 sensor camera. Key features include:
Gimbal-stabilized 6K/30 fps & 3.9K/60 fps S35 camera
58 mph max speed & 0-50 mph in 5 seconds
25-minute flight time & 4.3 miles line-of-sight
Lens not included!
Our most feature-rich drone from both a flight and a picture-quality perspective, it’s not for beginners. This combo fantastically pairs RAW, M43 image quality with stabilization and safety feature...
Yes. If you don’t need this capability and only plan to film in h.265 or h.264 to the MicroSD slot, you may be better served by the Inspire 2 with X4S camera.
This version of the Inspire 2 is intended for RAW / ProRes capture to DJI’s proprietary CINESSD format. We include (2) DJI CINESSD 480GB with the rental. If you think you’ll need more, we have them available to rent separately as well.
Do note that you must have a microSD memory card installed even if you’re recording to CineSSD. For that reason, we include (1) Sandisk UHS-1 microSDXC 32GB Extreme Plus U3 with the rental of this drone.
When you rent a second remote alongside an Inspire 2 drone package, you have the option to enable Dual Operator Mode. With one remote controlling the drone and the other remote controlling the gimbal and camera, this mode allows for finer control of flight-path and camera movement using a master-and-slave configuration.
DJI Inspire 2 Premium Combo w/ Zenmuse X7 does not include a lens. However, we do have them available for rent separately. See Compatible Lenses list on the left-hand side of this page.
Firmware can be updated through an internet-connected computer using the supplied USB Male A by USB Male A cable. Firmware can also be updated through the app on an internet connected phone, or tablet, using the mobile device’s USB charger cable (not supplied).
We’ll update firmware as the equipment moves through our building. However, as drone firmware is updated on an almost daily basis, the user must ensure the firmware is current before flight. Without up-to-date firmware, drone functionality could be limited. Access to the internet is required to update drone firmware.
The mobile device holder can fit up to an iPad Air sized device (no more than 6.69 in. tall).
No. The Inspire 2 is currently only compatible with X4S, X5S, & X7 cameras.
Yes. The Inspire 2 can’t fly with a battery pair that has a charge discrepancy greater than 13%. For best performance, you should sync batteries as pairs in the app before flying or charging. In some cases, you may need to update the firmware to successfully sync a battery pair.
If you’d like labels to indicate your battery pairs, please request them in the Special Instructions box during checkout.