The Teradek Bolt 500 Wireless 3G-SDI/HDMI Kit is an industry favorite for wireless video transmission. For a newer version of this kit, check out the Teradek Bolt 500 XT. Key features include:
SDI & HDMI Input & Output. That’s right, the Teradek Bolt 500 supports cross conversion! You can input a signal from an SDI or HDMI source and output from either one on the other end. The transmitter also has an SDI pass-through port.
1080/60p Wireless Monitoring. Offers support for uncompressed 10-bit 4:2:2 1080p video at up to 60 frames per second. Teradek states that line-of-sight transmission is up to 500 feet without break-up or image degradation, and up to 100 feet without line-of-sight with less than 1ms latency. If you lose the signal, the Bolt 500 will instantaneously reconnect once you move back into range. Need 4K capability? Check out the Teradek Bolt 4K 750 12G-SDI/HDMI Wireless Kit.
Multiple Receiver Streaming Capability. This kit includes one transmitter and one receiver; however, the Bolt 500 transmitter lets you send video to four Bolt 500 receivers simultaneously. You can rent additional receivers here.
Two New DFS Channels. Two newly introduced DFS channels make it easier for you to operate without interference.
Simple Pairing Process. We include a pairing guide and pairing pin with this kit. The pairing process is simple but will require you to use an external monitor to interface with the receiver. This rental does not include a monitor, but you can rent one here. You should plan to give yourself 5 to 10 minutes to complete the pairing process.
Sony L-Series Powered. For our kit, we opted to add Sony L-Series battery plates to both transmitter and receiver. We also include one AC adapter and one Teradek 2-Pin LEMO to D-Tap Cable for use with Gold Mount and V-Mount setups.
