The Blackmagic Design HyperDeck Studio HD Pro is an HDMI and 6G-SDI capable external capture and playback device for Blackmagic ATEM switchers that records to dual SSD or UHS-II SD bays. Key features include:
1RU broadcast deck for capture / playback over 6G-SDI or HDMI 2.0
Records uncompressed 10-bit, ProRes, or DNx to dual SSD or UHS-II SD card bays
Compatible with all ATEM switchers
On-board display and illuminated controls
This rental does not include SSDs, cables, or an ATEM switcher.
When used with an ATEM switcher, you will need some form of ethernet hub (not included). If you have any questions about using the HyperDeck with your existing network contact us and a tech will be happy to help you determine if this is the right gear for you.
The manufacturer recommends not using a SSD over 1TB in size. You can find any compatible media in the recommended section on your screen.
You can connect up to four HyperDecks to any ATEM running firmware version 6.8 or newer.
Looking for a 4-pack kit? We offer one here that ships in a single 4U case.
Yes! This device is equipped with a single 1/4" audio outputs for direct monitoring.
Need a 1/4" to 1/8" adapter for your headphones? No problem! While we don’t include an adapter by default, we will add one at no additional cost when requested in the special instructions box at checkout!
| Accessory Mount | Rack Mount |
| Brand | Blackmagic |
| Compatible Media | SD, External Storage, and SSD |
| Dimensions | 19 × 9.3 × 1.74″ (W x D x H) |
| Item Type | Monitoring & Recording |
| Maximum Resolution | 4K |
| Mfr. Model Number | HYPERD/ST/DFHP |
| Monitoring & Recording Type | Capture Device |
| Accessory Mount | Rack Mount |
| Brand | Blackmagic |
| Compatible Media | SD, External Storage, and SSD |
| Dimensions | 19 × 9.3 × 1.74″ (W x D x H) |
| Item Type | Monitoring & Recording |
| Maximum Resolution | 4K |
| Mfr. Model Number | HYPERD/ST/DFHP |
| Monitoring & Recording Type | Capture Device |