What’s Changed? The Fujifilm X-T3’s updated 26.1MP X-Trans CMOS 4 sensor and X-Processor 4 engine combine to give you the highest-quality images and fastest speeds of any camera in Fuji’s X series. It’s a marked improvement over the Fuji X-T2, which itself was widely praised for its image quality.

26.1MP X-Trans CMOS Sensor. The X-T3’s newly developed X-Trans 4 sensor boasts a back-illuminated design and a randomized pixel array that promote high image quality throughout its normal ISO range of 160-12,800. In addition to facilitating exceptional low-light use, the X-Processor Pro Engine also supercharges operation speed. Image processing, startup time, shutter lag, and general navigation have all been greatly reduced, while maximum continuous shooting increases to 30 fps.

UHD and DCI 4K Video. The X-T3 isn’t just a fantastic still camera; it also has a range of video capabilities. You get internal UHD 4K60p with video recording at 4:2:0 10-bit, and you can record clean, uncompressed HDMI output with 10-bit 4:2:2 color, both at up to 400 Mb/s. You can also record DCI 4K30 and Full HD 1080p120. You can handle color in post using the F-Log Gamma or by choosing from any number of Fuji’s film simulations and grain effects.

Phase-Detection Autofocus System. This camera’s 2.16m-point phase-detection autofocus system provides fast, accurate performance in a wide range of lighting conditions down to EV -3. Improved face and eye-detection autofocus maintain accurate tracking when you’re shooting portraits from the front or side, and eye-detection AF works in AF-C mode.

Touchscreen LCD and OLED EVF. The 3.0-inch, 1.04m-dot rear touchscreen LCD features a three-way tilt mechanism for a better view. And there’s a wide 3.69m-dot OLED electronic viewfinder with 0.75x magnification that remains blackout-free even when you’re shooting up to 30 fps. The EVF includes a Sports Finder mode, a 1.25x crop mode which marks a 16.6MP sensor-crop area so you can monitor your subject’s movement just outside the shooting frame.

Ergonomics and Build. This camera maintains much its predecessor’s layout, including locking functions on each control knob, and a focus lever for quick autofocus-point selection. The magnesium-build body is sealed to protect against dust, moisture, and the cold. The X-T3 is powered by an NP-W126S battery and boasts two UHD-II compatible SD-card slots.

Need a Memory Card? You’ll need an ultra-fast memory card for a camera this powerful, and we recommend the Sony 128GB SF-G Tough Series UHS-II SDXC. This camera can take full advantage of its superior 299 MB/s max write speed and 300 MB/s max read speed for high-resolution, high-bitrate capture.

Optional Boost. With the optional Fuji VG-XT3 Vertical Battery Grip, you can expand battery life and functionality.